Electro-Voice DH2T-16 General Description Cont’, Dimension Drawings Cont’, Accessories

General Description (Cont’): Frequency Response (On a Tube):

Pure aluminum rectangular voice coil wire is used to obtain the highest sensitivity. Proprietary bonding and winding technologies assure unsurpassed reliability and performance of all DH2T diaphragm assemblies.

Electro-Voice’s commitment to precision compression driver manufacturing and modern design techniques assure the DH2T user the highest level of audio and engineering excellence.

	Note: Frequency response and impedance of the DH2T-16 driver attatched to a
	25mm (1.0”) diameter plane wave tube, using one watt input (4 Vrms).
Dimension Drawings:	Frequency Response (On an HP64M Horn):

Top View

Side View

Bottom View

Accessories:

•	ADH-3 Adapter (For 1.38” Exit)	588-587
	(must be purchased separately)
•	ADH-5 Adapter (For 2.0” Exit)	588-2855
	(must be purchased separately)

Note: Frequency response and impedance of the DH2T-16 driver attached to an HP64M Horn, measured on axis in the far field using one watt input (4 Vrms). SPL calculated to 1 meter equivalent by inverse square law.

Dimension Drawings (Cont’):

Side View (Shown with Optional ADH-3 Adapter)

Side View (Shown with Optional ADH-5 Adapter)

DH2T-8 Part Number: 834-PA-2680

DH2T-16 Part Number: 834-PA-3391

12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043

www.electrovoice.com

© Telex Communications, Inc. 2/2002

Part Number 38110-094 Rev. A

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 887-9212 For warranty repair or service information, contact the Service Repair department at:

800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.