Asking for installation

To view images projected by the ceiling- mounted projector from the front:

When the projector is installed on the ceiling, the special ceiling mount bracket, which is separately sold, is required. Be sure to ask a certified installa- tion specialist for installation of the projector. Con- tact your dealer for details.

Mitsubishi assumes no responsibilities for any damage caused by use of other manufacturer’s ceiling bracket and by inadequate installation conditions even within the warranty period.

When installing the projector on the ceiling, set IMAGE REVERSE in the INSTALLATION menu to MIRROR INVERT.

Ask your installation specialist to provide a breaker. When you do not use the projector, be sure to shut down the main power by the breaker.

When the projector is installed on the ceiling, projected images may appear darker than those projected when the projector is installed on the floor. This symptom is not a malfunction.

Do not install the projector where the exhaust vents are exposed to air emitted by an air condi- tioning. Such installation may cause a break- down.

Do not install the projector near a fire alarm because it emits hot air from its exhaust vents.

To view images projected on the translucent screen from behind:

Be sure to ask a certified installation specialist for installation of the projector. Contact your dealer for details.

To view images projected from behind the screen, set IMAGE REVERSE in the INSTALLATION menu to MIRROR.

Dimension Drawings (unit : mm)

245

310

100

61

5

COMPONENT VIDEO IN

EN-30

Page 30
Image 30
Mitsubishi Electronics HC1100 user manual Asking for installation, Dimension Drawings unit mm