Mitsubishi Electronics HC1100 Using the remote control, Operational range of the remote control

Using the remote control

Operational range of the remote control

ENGLISH

Front of projector Rear of projector

30˚ 30˚ 30˚ 30˚

Operate the remote control within a distance of 10 m from the projec- tor, pointing the light beam at the remote control photo-sensor (front or rear) of the projector.

•Keep the remote control photo-sensor out of direct sunlight or fluorescent lamp light.

•Keep the remote control photo-sensor at least 2 m away from fluorescent lamps. Otherwise, the remote control may malfunction.

•If there is an inverter-operated fluorescent lamp near the remote control, the remote control operation may become unstable. On this occasion, stick the attached protection sticker on one of the photo-sensors that is closer to the fluorescent lamp.

When operating the remote control, keep the distance from the remote controller to the projector via the screen within about 5m. The operable range of the remote control, however, depends on the characteris- tics of the screen.

Reception angle

Vertical directions

20˚

10˚

Vertical directions (ceiling mount)

20˚

20˚

10˚

20˚

EN-9