FRX+660/FRX+660PI
Key Features:
•Pattern Control to 500 Hz
•60° x 60° coverage
•Built-in L-track rigging
•Available in black, white and unfinished
•Passive or bi-amp operation
•High sensitivity, 105 dB
•Ring-Mode Decoupling / RMDTM
•Full Coaxial Design
•Weatherized Version Available (FRX+660PI)
General Description:
FRX+ series is designed for applications in highly reverberant spaces where excellent directivity control down to 500 Hz is critical. In a trapezoidal enclosure no taller than a typical compact system and only a bit wider, they maintain control of coverage angles down to 500 Hz. A 15" LF transducer is coaxially horn loaded with a mouth nearly the size of the enclosure to provide excellent LF pattern control. These professional fixed install speakers deliver a broad range of performance options including multiple rotatable horn patterns, matching
Same size
Technical Specifications:
Freq. Response1 | |
Freq. Range1 | |
Max Calculated SPL: | 133 dB |
|
|
Horizontal Coverage: | 60° |
Vertical Coverage: | 60° |
|
|
LF Power Handling: | 400W Continuous, 1600W Peak |
|
|
HF Power Handling: | 60W Continuous, 240W Peak |
|
|
Passive Power Handling: | 400W Continuous, 1600W Peak |
|
|
LF Sensitivity | 105 dB, 1W/1m |
|
|
HF Sensitivity | 109 dB, 1W/1m |
|
|
Passive System | 105 dB, 1W/1m |
Sensitivity: |
|
Impedance: | 8 ohms (Nominal), 7.2 ohms (Min.) |
|
|
LF Transducer: | DL15X 15" (381mm) Driver, 8 ohms |
|
|
HF Transducer: | DH2t 2" (51mm) Diaphragm Comp. |
| Driver, 8 ohms |
|
|
Passive Crossover | 1350 Hz |
Frequency: |
|
Connectors: | Two barrier strips |
|
|
Enclosure Material: | |
|
|
Grille: | 16 GA steel (PI Version Stainless Steel) |
Environmental Spec: | IEC 529 IP24, (PI Version IP44) |
| MIL STD 810 |
|
|
Transformer: | See Page 4 |
Dim (H x W x D): | 31.5" x 28.5" x 27.0" |
| (800 x 724 x 686 mm) |
Net Weight (each): | 152 lbs (69.0 kg) |
|
|
Shipping Weight: | 157 lbs (71.2 kg) |
|
|
1Full Space measurement. Half Space use will improve LF response.