![](/images/new-backgrounds/1294232/29423215x1.webp)
MS3000 OWNERS MANUAL
Weight:2.06 lb/1.06 kg
MSH Handheld Transmitter
Power Output: | 10 mW terminated, |
Antenna: | Internal (patented) |
Modulation: | FM, +40 kHz Deviation w/50 us |
Frequency Response: | 50 Hz to 15,000 Hz |
Transducer: | |
| |
Supplied Accessory: | Stand adapter |
Battery: | 9 volt alkaline |
Approvals: | FCC, Part 74H |
| Industry Canada RSS123 |
FCC Identification: | B5DH211 |
Size: | 10.75 in long (27.3 cm) x 2 in (5.08 cm) max. |
Weight (MSHD) | 284 g (10 oz) without battery |
Weight (MSHC) | 246 g (9.6 oz) without battery |
MSB Bodypack Transmitter |
|
Power Output: | 10 mW terminated, |
Antenna: | Permanently attached |
Modulation: | FM, +40 kHz Deviation w/50 us |
TA4F Connector: | Pin 1: Ground; Pin 2: Mic Input; |
| Pin 3: +5 volt bias; Pin 4: +5 volt bias fed through a 3 K |
| ohm resistor for |
Frequency Response: | 50 Hz to 15,000 Hz |
Microphone Input Sensitivity: | 7.8 mV for full deviation |
DC Power: | 9 volt alkaline battery |
Approvals: | FCC, Part 74H |
| Industry Canada RSS123 |
FCC Identification: | B5DB108A |
Size (HxWxD): | 4.5 in x 2.6 in x 1.25 in (no antenna) |
| (114.3 cm x 66 cm x 31.75 cm) |
Weight: | 3.5 oz (480 grams) without battery |
| Figure |
| Pin 1 = ground |
| Pin 2 = mic input |
| Pin 3 = +5 volt bias |
| Pin 4 = +5 volt bias fed through 3K resistor for |
| electrets |
Figure 13
AVAILABLE ACCESSORIES |
| |
Model | Part # | Description |
ULM20 | ULM20 | |
CS200EX |
| |
CO2EX |
| |
E3K | Crown differoid headset microphone | |
HM2 |
| |
HM1 |
| |
| 879155 | ULM20 windscreen |
page 8