N/D267a & N/D267as

N/DYM® Dynamic Cardioid

Vocal Microphone

Key Features:

VOBTM technology provides tailored bass response for controlled “proximity effect” and exceptional vocal clarity

Cardioid pattern for superior feedback rejec- tion and acoustic isolation

Consistant sound over greater working distances than competitive models

Neodymium based magnet structure pro- vides greater sensitivity and signal-to-noise ratio

Warm GripTM handle for more comfortable feel

On/Off switch on N/D267as

General Description:

Technical Specifications:

The acoustic response of the N/D267a and 267as presents optimal performance in a live sound environment. The new “vocally optimized bass” or VOB™ technology provides the performer with reduced resonant distortion at low frequencies. Critical damping of the low frequency resonant peak has resulted in a microphone that replaces the “muddiness” found in competitive models with greater warmth and increased vocal clarity. The increased clarity permits greater working distances than other competitive microphones, and ensures a clean, clear, consistent sound that “cuts through the mix.”

Operation

The low frequency response of the N/D267a and 267as microphone varies with the distance from the sound source. Known as “proximity effect,” maximum bass response is produced in “close-up” use with the microphone 1/4 inch from the sound source. Normal bass response is experienced with working distances greater than 24 inches. Working close to the microphone will produce a more robust sound. Close up positioning of the microphone will also reduce the potential for feedback from the sound reinforcement system. When close-talked, the bass-boost provides an increase in overall microphone output level. The mixer gain may be proportionately reduced, resulting in a reduction of the system’s sensitivity to feedback caused by sound entering the microphone from the loudspeakers.

Element:

Dynamic N/DYM® magnet structure

 

 

Freq. Response, Close:

45 Hz - 15,000 Hz

 

 

Freq. Response, Far:

100 Hz - 15,000 Hz

 

 

 

Polar Pattern:

Cardioid

 

 

 

Sensitivity, Open Circuit

2.9 mV/pascal

Voltage @ 1 kHz:

 

 

Polarity:

Pin 2 positive, ref. pin 3 with positive

 

pressure on diaphragm

 

 

Impedance:

600 ohms balanced (low-z)

 

 

Microphone Connector:

3-pin, XLR-type

 

 

Finish:

Non-reflecting black

 

 

 

Materials:

Memraflex™

grille screen

 

Warm Grip™

handle

 

 

Accessories Included:

Stand Adapter (Black)

 

Soft Zippered "Gig" Bag

Dimensions, Length:

7.12" (181 mm)

Diameter:

2.05" (52 mm)

Shank:

0.80" (20 mm)

 

 

Net Weight:

8.4 oz (238 g)

 

 

Shipping Weight:

18.2 oz (515 g)

 

 

 

Page 1
Image 1
Electro-Voice N/D267as technical specifications General Description, Operation