ND6x-8/ND6x-16

3-Inch High Frequency

NeodymiumTransducer

Key Features:

•Extremely high acoustic output

•Geometrically optimized titanium diaphragm

•Very high sensitivity and reliability

•500 Hz minimum crossover frequency

•Compact, rugged and light weight

•1.4" exit diameter

•2.0” exit diameter with ADH-6 adapter

•Die-cast aluminum heatsink

General Description:

The Electro-Voice ND6x is a world-class high-frequency compression driver capable of extremely high acoustic output over a wide frequency range.

Precise engineering, along with careful selection of materials and advanced driver architecture, has resulted in a driver that is ideally suited for the most demanding presentation of high quality music and communications program.

Incorporating Electro-Voice’s exclusive Ring Mode Decoupling (RMD) through all design phases has produced drivers with unmatched accuracy while minimizing acoustic resonances and time domain ringing throughout the driver structure.

The small size and weight-to-power ratio of the ND6x assures easy installations where weight may be a concern. The 2.15 Tesla flux density provided by the Neodymium magnet exceeds that of conventional drivers at a fraction of the size.

A unique, geometrically optimized 3" titanium diaphragm, consisting of a one-piece dome and suspension system gives these drivers an ideal combination of superb high-frequency response and resistance to fatigue.

Integrated into the ND6x’s design is a finned aluminum heatsink to increase power handling and reliability.

The ND6x is recommended for all large horn installations where lower crossover points are required, such as cinema applications

Technical Specifications:

 

ND6x-8

 

ND6x-16

 

 

 

 

Nominal Impedance:

8 ohms

 

16 ohms

 

 

 

 

Minimum Impedance:

7 ohms @ 6 kHz

 

14 ohms

 

 

 

 

DC Resistance:

4.5 ohms

 

10 ohms

 

 

 

 

Freq. Response:

500-20,000 Hz

 

 

 

 

Power Capacity:

50 Watts1, 100 Watts Cont. Prog.

 

 

 

 

Recommended

500 Hz or higher

 

Crossover :

 

 

 

 

 

 

 

Nominal Efficiency:

28%

 

 

 

 

 

 

Sound Pressure Level2 :

115 dB, HP4020 Horn

 

(1 Watt @ 1 Meter)

113 dB, HP6040 Horn

 

 

111 dB, HP9041 Horn

 

 

 

 

 

Throat Diameter:

1.38" (35mm)

 

 

 

 

 

Voice Coil Diameter:

3" (75 mm)

 

 

 

 

 

Voice Coil Wire:

Pure Aluminum Ribbon

 

 

 

 

Diaphragm Construction:

0.04 mm Pure Titanium Dome and

 

Surround

 

 

 

 

Electrical Connection:

Screw Terminals (Accepts a pair of

 

12GA Wires

 

 

 

 

Polarity:

Positive Voltage to Positive Terminal

 

Produces a Positive Acoustic

 

Pressure

 

 

 

 

 

Flux Density:

2.15 Tesla

 

 

 

 

 

Net Weight (each):

5.5 lbs (2.5 kg)

 

 

 

 

 

Shipping Weight:

6.5 lbs (3.0 kg)

 

 

 

 

 

1Power capacity per AES standard. Continuous pink noise, 500 - 5000 Hz with a 6 dB crest factor, 2 hours.

2Sound Pressure measured on axis in the far field with 1 Watt input of band-limited pink noise from 1000 - 5000 Hz and calculated to 1 Meter equivalent by inverse square law.

Page 1 Page 2
Page 1
Image 1
Electro-Voice ND6x-16, ND6x-8 technical specifications General Description, Technical Specifications
Page 1 Page 2

ND6x-16, ND6x-8 specifications

The Electro-Voice ND6x-8 and ND6x-16 are dynamic microphones designed for professional audio applications, delivering outstanding performance tailored for both live sound and studio recording environments. These microphones are engineered to provide high-quality sound reproduction, durability, and versatility, making them suitable for a variety of vocal and instrument applications.

One of the key features of both models is their advanced neodymium magnet structure, which enhances sensitivity and output level. This allows for clear and accurate sound capture even in high-pressure environments. The microphones are equipped with a custom-designed diaphragm that further boosts their response and tonal richness, ensuring that every nuance of a performance is faithfully reproduced.

The ND6x series microphones exhibit superior feedback rejection and off-axis response, which is particularly beneficial in live settings. This characteristic enables performers to move freely on stage while minimizing the risk of unwanted feedback. Additionally, the tight cardioid polar pattern ensures that the microphones primarily capture sound from the front, effectively isolating the desired sound source from ambient noise and stage sounds.

Another notable feature of the ND6x-8 and ND6x-16 is their robust construction. Made with durable and lightweight materials, they are built to withstand the rigors of frequent use. The rugged metal grille protects the capsule from impact, while the shock-mount design reduces handling noise, contributing further to the clean sound capture.

The ND6x-8 model is ideal for vocal applications, offering a frequency response that emphasizes clarity and presence in the mid-range. This makes it an excellent choice for singers and public speakers, providing the articulation needed to cut through the mix in live performances. On the other hand, the ND6x-16 is designed with versatility in mind, suitable for both vocals and instrument amplification, including guitar amps and percussion.

In summary, the Electro-Voice ND6x-8 and ND6x-16 microphones are powerful tools for audio professionals. Their innovative technologies, robust construction, and exceptional sound quality make them highly sought after for both live performances and studio recording sessions. Whether capturing the nuances of a powerful vocal performance or amplifying an intricate instrument, these microphones stand out as reliable and high-performing solutions in the world of professional audio.
Top Page Image Contents