![PA1250T](/images/new-backgrounds/14323/143231x1.webp)
PA1250T
Single-Channel
Power Amplifier
Key Features:
•1 x 270W at 70/100V
•2 U Rack Space Chassis
•Stepped Rear Level Controls
•Complete Protection Package
•Selectable 50 Hz or 300 Hz Hi-Pass Filter
•Phoenix Type Input
•Phoenix Type Output
•High Efficiency Circuit Design
•Front Panel Power On/Off
General Description:
The
High performance torroidal power and output transformers combine clean saturation free audio performance with cool running operation. The PA1250T features many of the same comprehensive protection circuits typical in EV amplifiers. Complete protection is provided for high temperature, audio limiters, power up delay and peak current limiters. In addition to the rated output power, the PA1250T provides excellent headroom for a wide dynamic range on music signals. The onboard dynamic limiter ensures that the output clipping of the PA1250T will not will not generate excessive distortion. A detented and marked level control on the rear panel provides hidden reliable level adjustments for the channel. Front panel LED indicates signal present, 0 dB, and limit. Phoenix type connectors for inputs and outputs provide easy rack wiring.
Technical Specifications:
Number of Channels 1
Load Impedance 70V/100V
Rated Output Power (*Rated Load) 270W
THD<1%, 1kHz
Rated Output Power (*Rated Load) 250W
THD<0.2%, 20Hz… 20kHz
Slew Rate at 1kHz 41V/µs
Frequency Response,
Power Bandwidth THD=1%, Ref. 45Hz - >20kHz 1kHz, Half Power
Input Impedance, 20Hz ... 20kHz, >20kOhm
Balanced
Input Sensitivity at Rated Output 0dBu (775mV)
Power or Voltage, 1kHz
THD at rated output power, <0.1%
MBW=80kHz, 1kHz
DIM30, 3.15kHz, 15kHz <0.1%
Power Requirements 120V or 230V, 50Hz - 60Hz
Protection Audio Limiters
High Temperature
Peak Current Limiters
Cooling
Dimensions (W x H x D), mm 483 x 88 x 406mm (2Ru) 19" x 3.5" x 16"
Weight 16.5kg (36.34lbs)
Low Impedance Outputs:
-Min. Rated Load for Single Channel Operation is 4 Ohms. 2 Ohm Load is Not Recommended.
-Min. Rated Load for Bridged Operation is 8 Ohms. 4 Ohm Load is Not Recommended.