Electro-Voice manual R200 SERIES COMPONENTS

Models: R200

1 12
Download 12 pages 3.99 Kb
Page 3
Image 3
R200 SERIES OWNER’S MANUAL

R200 OWNERS MANUAL

Description

R200 SERIES OWNER’S MANUAL

System Features

True-diversity system with Secure-Phasetmen- sures maximum range and freedom from inter- ference

Well-designed companding and audio circuitry insure high signal-to-noise ratio and excellent sound quality

Choice of handheld, bodypack, lavalier, head- set and guitar systems

Permanently attached antennas make setup quick and easy. Receivers may be rack- mounted with optional kit.

Audio output via 3-pin XLR-type balanced mic level and ¼-inch unbalanced line level connec- tors

Designed and manufactured in the United States of America

DESCRIPTION

The Electro-Voice R200 is a series of UHF wire- less systems that combine EV’s legendary quality, reliability and high value. The R200 Series trans- mitters and receivers operate in the UHF fre- quency range between 710.100 and 721.350 MHz (channels 54-55 in the TV band) on single fre- quencies. The well-designed audio circuitry en- sures excellent signal-to-noise ratio with accurate sound quality.

SECURE-PHASEtmDIVERSITY

The R200 Series receivers utilize patented Se- cure-Phasetmdiversity circuitry that provides the strongest, cleanest signal possible. Unlike other diversity circuits that switch antennas, Secure- Phasetm utilizes the signal from both antennas at all times to increase signal strength, minimize dropouts and lower the potential for interference.

If the signal from the transmitter changes phase or polarity (a common cause of dropouts), the cir- cuit adjusts the phase angle between the two an- tennas receiving circuits to prevent cancellation.

R200 SERIES COMPONENTS

R200 Secure-PhasetmDiversity UHF Receivers

Secure-Phasetmdiversity for maximum range and reliability

Clean, undistorted sound reproduction using proprietary compander circuitry

Audio output via rear-mounted XLR-type 3-pin mic level or front-mounted, adjustable line level ¼-inch connector

May be rack mounted with optional kit

External AC power adapter minimizes noise and makes voltage changes easy if necessary. Power can also be supplied from a 12-volt bat- tery or filtered power supply.

Permanently attached, specially-tuned anten- nas are easy to position

RCU: UHF receiver specially designed to re- produce all the nuances of the voice

GRU: UHF guitar receiver specially designed to handle the transients of a guitar

The R200 Series receivers are easy to set up and operate. The only controls are the adjustable out- put level and squelch controls. The antennas are permanently attached telescoping types that are easy to position and are tuned to the range of op- eration. An optional rack-mount kit allows two sys- tems to be mounted in a single rack space.

HTU Handheld Transmitter

Electro-Voice BK-1 (HTUC) cardioid condenser microphone transducer or Electro-Voice N/ D157 (HTUD) cardioid N/DYM dynamic trans- ducer.

Separate LEDs for power on and battery status for easy monitoring of operational modes.

Separate power and audio mute switches for operational flexibility.

Wide-range gain control allows approximately 40 dB of adjustment.

Special “soft-touch” finish and ergonomically designed handle makes holding comfortable and secure.

Up to 10 hours of operation on a 9-volt alkaline battery.

Bodypack Transmitters

Two models are available:

BPU: UHF bodypack with TA4F connector al- lows the user the freedom of microphone se- lection. Standard microphones include the Electro-Voice ULM20 cardioid condenser lavalier microphone and the HM2 headset mi- crophone. The TA4F connector allows connec- tion of any dynamic or condenser microphone that can be biased with 5 volts dc phantom.

BGU: UHF guitar bodypack with hardwired cable and ¼-inch connector with specially de- signed audio circuitry to handle guitar tran- sients

Separate on/off and large mute switches for operational flexibility

LED battery condition indicator gives quick indication of battery strength

page 3

Page 3
Image 3
Electro-Voice manual R200 SERIES COMPONENTS