Frequency Response: | Polar Response: |
Application Notes:
Using the Windscreen
The RE92TX includes a windscreen that can be used anytime wind noise or breath pop is a problem. To install the windscreen, simply press it on the top of the microphone. The windscreen has an internal frame that includes a stop to help positioned the windscreen correctly. When installing the windscreen, make sure to push it down on the microphone as far as it will go. This will ensure that the frame inside the windscreen doesn’t cover any of the acoustic side ports on the microphone.
Microphone Positioning
Best results will be achieved with the mic positioned 3 to 6 inches below the neckline. Typical locations are on the lapel, shirt collar, or on the shirt directly below the chin. You should avoid covering the microphone with any cloth, since this could change the frequency response characteristics of the microphone.
If mechanical noise pickup from the cable is a problem, it can be minimized by looping the cable up and through the tie clip as shown.
Dimensions:
12000 Portland Avenue South, Burnsville, MN 55337
www.electrovoice.com
© Telex Communications, Inc. 12/2003
Part Number 38110-324 Rev 2
U.S.A. and Canada only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952
Specifications subject to change without notice.
