Electro-Voice Sx600 user manual Pole Mounting, Block Wall Mounting, Electro-Voice

Pole Mounting

Follow the pole manufacturer’s recommendations when mounting to a pole. On wooden poles, make sure there is no rot or other deterioration. Through-bolts with backing plates are highly recommended. Lag bolts should only be used in conjunction with straps.

1/2” Bolts

Approved Straps(6 Req’d)

(4 Req’d)

SuperSAMTM

Bracket

Figure 2: Pole Mounting

Block Wall Mounting

Do not attempt to mount an Sx600 to a block or brick wall without through-bolts and large, heavy steel backing plates on both sides of the wall. On poured concrete walls use deep ½ inch diameter anchors that cannot be pulled out once set. Use all 6 mounting holes.

SuperSAMTM

Bracket

1/2” Bolts

(6 Req’d)

Block Wall Heavy Steel Backing Plates Block Wall

Figure 3: Block Wall Mounting

Electro-Voice®￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ 5