Electro-Voice ZX1-90 technical specifications General Description, Technical Specifications

ZX1-90

8-InchTwo-Way, 90° x 50° Indoor/Outdoor Portable Loudspeaker System

Key Features:

•Extremely Smooth,Wide Frequency Response

•Attractive, Clean Design with Full Grille

•EV8L 8” High-Output LF Transducer

•DH2005 1” Exit True Compression Driver

•90° x 50° Coverage Pattern

•Rotatable Horn Design

•Integral Monitor Angle on Enclosure

•200W Cont., 800W Peak Power Handling

•High Sensitivity, 123 dB Maximum SPL

•Built-In Pole Mount

•Integral Handle Pocket for Easy Carrying

General Description:

The Electro-Voice® ZX1 is the new standard of no compromise audio performance and versatility for compact sound reinforce- ment.

The high-tech enclosure uses injection-molded high-impact polypropylene to make the ZX1 extremely durable. The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low frequency response without vent noise.

The ZX1’s long excursion, high output 8" woofer with a weather- ized treated cone delivers smooth low frequency performance with exceptional reliability. A sophisticated crossover network integrates it with the DH2005, a 1.25” voice coil titanium diaphragm true compression driver for maximum output with extended fre- quency response. Full-bandwidth overload protection is pro- vided for reliable, long term operation without audible effect.

The horn features 90° x 50° coverage with the important added benefit of rotation, allowing the ZX1 to be oriented either horizon- tally or vertically for the ultimate in coverage flexibility.

The ZX1’s molded polymer enclosure is inherently water resis- tant. The enclosure features an integrated pole mount, a pocket handle, and a wedge-angle design allowing for use as a stage monitor.

Technical Specifications:

Freq. Response1 (-3 dB):	60 Hz - 20 kHz
Freq. Range1 (-10 dB):	48 Hz - 20 kHz
Rec. Hipass Frequency:	40 Hz
Axial Sensitivity1:	94 dB (1W/1m)
Max Calculated SPL:	123 dB
Horizontal Coverage:	90° or 50°
Vertical Coverage:	50° or 90°
Rated System Power:	200W Cont.2, 400W Prog., 800W Peak
LF Transducer:	EV8L, 8 in (203mm) Driver
HF Transducer:	DH2005, 1 in. (25.4mm) Exit
	Compression Driver
Crossover Frequency:	1.7 kHz
Nominal Impedance:	8 Ohms
Minimum Impedance:	6 Ohms
Connectors:	Neutrik Speakon NL4
Enclosure Material:	High Impact Polymer
Grille:	Polyester Powder Coated, 18GA
	Galvanized Steel
Dim (H x W x D):	457mm x 282mm x 264mm
	(17.98" x 11.12" x 10.38")
Net Weight:	8.4 kg (18.5 lbs)
Shipping Weight:	10.2 kg (22.5 lbs)

1Half Space Measurement.

2IEC Noise, 6 dB Crest Factor.