Painting Zx5 Speaker Systems
Painting a Zx5 Enclosure
The Zx5 Loudspeaker Enclosures are made of a high performance Polypropylene material. For best paint adhesion, we recommend a “Plastic Adhesion Promoter” be applied before any paint. Sherwin Williams Plastic Adhesion Promoter UP07226 is a good example (See Telex document number
Painting a Zx5 Grille
Remove grille from loudspeaker and remove the backing material & logo from grille prior to painting. Once the paint is dry, reapply the backing material and logo to the grille. Spray adhesive such as 3M Super 77 may help adhere the backing material to the grille.
Additional Precautions to be Taken
Prior to painting, be sure to take precautions not to get paint into the transducers. This can be done by masking the grille, temporarily removing the grille and masking the transducers, or by temporarily removing the grille and temporarily removing the transducers. Precautions must also be taken not to get paint into any exposed electrical components by masking them off prior to painting. It is also recommended that any exposed rigging points, warning labels, or instruction labels be masked off for ease of future operation.
Grille Masked
WARNING: It is critical to the system’s operation
that all transducers and exposed electrical components be masked off prior to painting.
Rigging Points Masked
Zx5 Enclosure
Painting View:
Painting the Zx5 Enclosure
16 |