8
Tilt the appliance slightly towards the
rear and prop it securely.
Unscrew the door hinge screws (K)
and remove the hinge pin bracket (1).
Open the door a little way and take it
out downwards.
☞
☞
☞
Reversing the door
The side at which the door opens can be changed from the right side
(as supplied) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appli-
ance must not be connected to the mains. Remove plug from the
mains beforehand.
Do not obstruct the space underneath. The back of the cabinet may be
placed close to the wall but must not touch it. DO NOT install in places
with restricted ventilation.
Adjust the level of the appliance by screwing out the adjustable foot,
or feet, at the bottom of the cabinet using your fingers.
A
EG97
K
1
If your refrigerator is installed under
a continuous worktop, an air outlet
opening of at least 200 cm2and a
ventilation grille matching the work-
top design should be installed at the
rear of the worktop.
The cut surfaces of the worktop
should be varnished to avoid swelling
due to penetration of moisture.
200 cm2