Electrolux 1254-6 iU installation instructions Magnetic door seal

Models: 1254-6 iU

1 32
Download 32 pages 55.09 Kb
Page 23
Image 23
Magnetic door seal

Switch off the appliance and unplug it.

Clean the appliance and the interior accessories with a cloth and lukewarm water. Commercially available dish washing detergents may also be used.

After cleaning wipe with fresh water and rub dry.

After everything is dry, switch to fast freeze. After running the appli- ance for two or three hours, it is ready again for storing frozen food.

An accumulation of dust will affect the performance of the appliance and cause excessive electricity consump- tion. The structure of the appliance permits you to clean the rear zone close to the wall, using a vacuum cleaner.

Remove the plinth (1), then the venti- lation grid (2);

Carefully pull the air deflector out (3).

3 2 1

Magnetic door seal

After opening and closing the door of your freezer you will not be able to open the door again immediately. This is because a vacuum will have developed inside, keeping the door closed until the pressures inside and outside the door have equalised. After a few minutes you can easily reopen the door.

23

Page 23
Image 23
Electrolux 1254-6 iU installation instructions Magnetic door seal