There is too much laundry inside the appliance.
have not been chosen.
gramme or drying time
The machine will not dry or An appropriate drying pro- the laundry is not dry
enough
Possible cause
The unbalance detection device that prevents excessive vibration during spinning has cut in.
The water tap is not open (E10).
The drying time has not been selected.

Something not working?

Problem

Spinning starts late or the machine does not spin

Solution

If the laundry is not evenly distributed inside the drum at the beginning of the spin cycle, the machine detects this and tries to redistribute it more evenly by means of a few drum rotations.

Only when the laundry is more evenly distributed will the spin cycle be performed, at a lower speed, if the laundry is not evenly distributed.

If, after about 6 minutes, the laundry is still tangled, the machine will not spin. Therefore, if the laundry is still wet at the end of the cycle, it is advisable to redistribute it manually inside the drum and to select the spin programme again.

Open the water tap.

Select the drying time.

Select the appropriate drying time suitable for the required degree of drying, according to the type of fabric (cottons or easy-cares).

Reduce the load.

41

Page 41
Image 41
Electrolux 12710 VIT, 14710 VIT manual Reduce the load