8
Ð excessive amounts of fresh food are placed inside; or
Ð if the appliance door is open for too long.
Important note: if you operate the fast-freeze switch or adjust the
temperature control knob, the motor might not start immediately but
only after some time. This does not mean that your appliance has a
fault.
Starting up and temperature regulation
Please clean the appliance interior and all accessories prior to star-
ting the appliance. Plug in the appliance at the mains supply.
¥ Push the ON/OFF button (E) The green lamp (D) comes on.
¥ Turn the temperature control knob (F) in the direction of ã1Ò.
¥ The red lamp (C) comes on, the audible warning sounds , and the
refrigeration motor starts up.
¥ Operate the fast-freeze button (A). The yellow pilot lamp (B) comes
on and the audible warning stops.
¥ Only when the red lamp (C) has gone out should you reset the fast-
freeze button (A) the yellow light (B) goes out.
Setting Ò0Ó: Off.
Setting Ò1Ó: Hightest temperature, (warmest setting).
Setting Ò4Ó (end-stop) : Lowest temperature, (coldest setting).
The exact setting should be chosen keeping in mind that the tempe-
rature inside the appliance depends on:
- the quantity of food stored
- how often the door is opened
- ambient temperature

Important:

Regularly check on the red temperature pilot lamp (C) and the ther-
mometer that the required storage temperature is being maintained.
Audible temperature alarm
Your freezer is equipped with an audible temperature alarm, an acou-
stic warning sounds simultaneously with illumination of the red tem-
perature pilot lamp, alerting you to the fact that the storage tempera-
ture in your freezer is too high or too warm. The audible warning
sounds until it is switched off by operation of the fast-freeze button.