24
NOTE
The washer will automatically prompt you to
run the SYSTEM CLEAN cycle every 50 cycles.
You may press the cancel button to manually
perform the cycle at another time.
Care & Cleaning
TO REFRESH WASH DRUM
Perform the SYSTEM CLEAN cycle to refresh the
wash drum follow these steps:
Wake up the washer by pressing any button, ro-1.
tate cycle knob to the hand wash cycle, press
the start button and then the cancel button.
Wake up the washer again by pressing any but-2.
ton, then immediately and simultaneously press
and hold both the eco friendly and control
lockbuttonsfor5seconds,oruntiltheLCD
display changes.
Remove all clothing from the drum, add 1 cup 3.
liquid chlorine bleach to the empty wash drum,
and press start.
This maintenance cycle uses hot water and two
rinses to remove residue that may cause odor.
IMPORTANT
DONOTloadgarmentsorotheritemsinthe
washer when cleaning the inside of the washer.
OTHER INSIDE CLEANING
Before cleaning the washer interior, unplug the •
electrical power cord to avoid electrical shock
hazards.
Dry around the washer door opening, flexible •
gasket, and door glass. These areas should
always be clean to ensure a water tight seal.
When extremely soiled items have been •
washed, a dirty residue may remain on the
drum. Remove this by wiping the drum with a
nonabrasive household cleanser. Rinse thor-
oughly with water.
Periodically, wipe dry the folds in the bottom •
of the flexible gasket to remove lint and other
debris.
The drum vanes may become stained from fab-•
ric dye. Clean these parts with a nonabrasive
household cleanser to prevent dye transfer to
future loads.