18 Operating Instructions
SANITIZE/COLD
This setting sanitizes heavily soiled colorfast fabrics
such as towels, bedding, and children’s clothing by
killing 99.9% of bacteria using wash water heated
with a boost heater to 152° F (67° C). Cold water is
used to cool and rinse the load. This setting is only
available with the deep clean sanitize cycle.
HOT/COLD
Use this setting for heavily soiled white or colorfast
cottons and blends.
WARM/COLD
Use this setting for normally soiled white or colorfast
cottons or blends.
WARM/WARM
Use this setting for washable woolens or when a
warm water rinse is desired.
COLD/COLD
Use this setting for lightly soiled non-colorfast items,
knits, delicates, and hand washables.
Max, high, medium, and low spin speeds are
available for each cycle. The spin speedand/or
duration of final spin vary from cycle to cycle.
Increasing the spin speed will extract more water,
decrease drying time and conserve energy. De-
creasing the spin speed will reduce wrinkling.
Use no spin to omit the final spin at the end of the
cycle. The load will be very wet. Remove items from
the wash drum to drip dry or select the spin only
cycle to remove excess water at a more convenient
time.
Adjust the wash time in 3-minute increments based
on the soil level of each load. Normal, heavy, extra
heavy, light and extra light Soil levels are available.
Temperature, con’t
Spin Speed
Soil Level