Electrolux 1600 manual Quantities of detergent and conditioners?, Water softening

Detergent and Conditioners

Which detergent and conditioners?

Only use detergents and conditioners that are suitable for use in wash- ing machines. Always follow the manufacturer's instructions.

Quantities of detergent and conditioners?

The quantity to be used will depend on:

•degree of soiling of the washing

•degree of hardness of the water supply

•load

2 If the manufacturer does not indicate the amounts to use for smaller loads, for half-loads use a third less than the amount recommended for a full load, and for smaller loads and EASY IRON use half the amount recommended for a full load.

Please follow the detergent and conditioner manufacturers’ instruc- tions for use and dosing recommendations.

Water softening

For medium to high water hardness (hardness class II upwards) a water softening agent can be used. Refer to the manufacturer's instructions. Then always add the appropriate amount of detergent (underdosing) for hardness class I (soft). Your local Water Authority can advise you on the hardness of the water in your area.

Water hardness details

Hardness class	Water hardness in °dH	Water hardness in ppm
	(German hardness scale)	(Parts Per Million)
I - soft	0 - 7	to	125
II - medium hard	7 - 14	125	- 250
III - hard	14 - 21	250	- 375
IV - very hard	greater than 21	greater than 375

24