Electrolux 1600 When the wash programme is complete, For rinse hold, Spin, Short spin or drain

When the wash programme is complete

When a wash programme is complete, PLEASE TAKE OUT THE CLOTHES will appear in the display.

3 If you do not press any buttons or press the control knob within three minutes of the programme finishing, the washing machine will switch into standby mode. The stand-by mode is cancelled by pressing one of the buttons or turning the knob.

3 If EASY IRON has been selected, a crease prevention cycle of approx. 30 minutes takes place after the programme has ended. You can remove the washing at any time during the crease prevention cycle. To do this, press the PAUSE button and the door can be opened.

For rinse hold

If the wash cycle was ended with a rinse hold, the water must first be drained and if necessary the washing spun:

Spin:

1.Set the desired spin speed.

2.Press the START button. The washing will be spun.

Short spin or drain:

1.Switch the appliance off and then on again.

2.Using the control knob, either

–highlight SHORT SPIN (reduce spin speed if re- quired) or

–highlight DRAIN.

	DELICATES 30°C
	RINSE HOLD	11:25-11:28
START		N§
		RINSE HOLD
		###############

RINSE H.

	MOISTURE 97 %
DELICATES 30°C
1000 RPM	11:25-11:28
START	N§
	RINSE HOLD
	###############
1000	MOISTURE 97 %

SHORT SPIN
800 RPM	11:25-11:28
START	ú
	FASHION
	SHORT SPIN)
800	SPIN
	STARCH
OPTIONS	DRAIN

33