Electrolux 231GR-M Electrical connection, Stainless steel surfaces, The ceramic glass griddle

Electrical connection

The electrical connection may only be performed by a qualified electrician/ competent person. The electrical connection must be carried out in accordance with prevailing regulations for appliances using heavy current. The connection must comply with any specific requirements specified by the local electricity supply authority.

There must be no interference with any of the unit’s electrical parts.

The cable is mounted in the pegs as shown.

Unscrew the cover while connecting the cables.

A unit led directly to the power point or the outlet rose.

More units may be connected via one or more junction boxes.

The cable must be connected via an external switch with a contact separation of at least 3 mm in each pole.

Please observe these instructions, otherwise the warranty will not cover any damage that may occur.

Single-phase zero-earth Cable type 1,5 mm² HO5VV-F. The cable outside diameter must be between 7,5 and 10,5 mm.

		Stainless steel surfaces
		Perform daily cleaning with a slightly
		damp cloth. For more severe soiling,
		use a liquid scouring cream. Always
		clean the steel in the direction of the
		steel finish. To ensure that the steel
		retains its shine, it is recommended
		that you use a polishing agent for
		stainless steel on a regular basis.
	Green/Yellow	Always polish in the direction of the
		steel finish (cross-wise).
		Never use steel wool, metal sponges or
		other abrasive cleaning agents.
Brown	Blue	The ceramic glass griddle
		The glass griddle must be cleaned each
		time it has been used.
Cover		1. Pour water onto the glass griddle,
		add a little washing-up liquid, and
		scrape off as much as possible using
		the scraper. Remove the dirty water
		with kitchen roll.
		2. Use the rough side of a scouring
		sponge to apply more water and
		detergent (washing-up liquid or
		liquid scouring agent) to the glass
		surface. Scour thoroughly.
		3. Remove the dirty water with kitchen
		roll.
		4. Apply more water and washing-up
		liquid, using the rough side of a
		scouring sponge. Scour thoroughly.

5.Heat the glass griddle until the water boils, brushing with a stiff brush as you do so.

6.Switch off the glass griddle when the water boils. Continue cleaning with the stiff brush.

7.Allow the glass griddle to cool (only cool enough so you can touch it).

8.Remove the dirty water with kitchen roll.

9.Wipe the surface with a clean, wet cloth.

10.Wipe the surface with a dry cloth.

11.Apply a thin coat of cooking oil to the glass griddle and rub in.

12 9