GAS COOKTOP INSTALLATION INSTRUCTIONS

The supply line should be equipped with an approved shutoff valve. This valve should be located in the same room as the cooktop and should be in a location that allows ease of opening and closing. Do not block access to the shutoff valve. The valve is for turning on or shutting off gas to the appliance.

Grounding Instructions

IMPORTANT Please read carefully.

For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3- prong (grounding) plug which mates with a standard 3- prong grounding wall receptacle (see Figure 7) to minimize the possibility of electric shock hazard from the appliance.

The wall receptacle and circuit should be checked by a qualified electrician to make sure the receptacle is properly grounded.

Figure 6

Once the regulator is in place, open the shutoff valve in the gas supply line. Wait a few minutes for gas to move through the gas line.

Check for leaks. After connecting the cooktop to the gas supply, check the system for leaks with a manometer. If a manometer is not available, turn on the gas supply and use a liquid leak detector (or soap and water) at all joints and connections to check for leaks.

Do not use a flame to check for leaks from gas connections. Checking for leaks with a flame may result in a fire or explosion.

Preferred Method

Grounding type wall receptacle

Do not, under any circumstances, cut, remove,

or bypass the grounding prong.

Power supply cord with 3-prong grounding plug.

Figure 7

Tighten all connections if necessary to prevent gas leakage in the cooktop or supply line.

Check alignment of control knob valves after connecting the cooktop to the gas supply to be sure the cooktop manifold pipe has not moved. A misalignment could cause the valve stems to rub on the control panel, resulting in a gas leak at the valve.

Disconnect this cooktop and its individual shutoff valve from the gas supply piping system during any pressure testing of that system at test pressures greater than 1/2 psig (3.5 kPa or 14" (35.6 cm) water column).

Isolate the cooktop from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa or 14" (35.6 cm) water column).

Electrical Requirements

120 volt, 60 Hertz, properly grounded branch circuit protected by a 15 amp circuit breaker or time delay fuse.

Do not use an extension cord with this cooktop.

Where a standard 2-prong wall receptacle is installed, it is the personal responsibility and obligation of the consumer to have it replaced by a properly grounded 3- prong wall receptacle.

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Disconnect electrical supply cord from wall receptacle before servicing cooktop.

Cooktop Installation

1.Visually inspect the cooktop for damage.

2.If you are installing the optional Stainless Steel backsplash, first fix it at the back of the cooktop using the screws supplied with the kit and follow the instructions attached.

3.Set the cooktop into the countertop cutout.

NOTE: Do not use caulking compound; cooktop should be removable for service when needed.

6

Page 5 Page 7
Page 6
Image 6
Electrolux 318201475 installation instructions Grounding Instructions, Electrical Requirements, Cooktop Installation
Page 5 Page 7

318201475 specifications

The Electrolux 318201475 is a versatile and efficient appliance designed to enhance your culinary experience. This product is particularly known for its exceptional performance, user-friendly features, and durable construction, making it a popular choice among both amateur cooks and professional chefs.

One of the standout features of the Electrolux 318201475 is its advanced cooking technology. This appliance utilizes state-of-the-art induction heating, which allows for precise temperature control and faster cooking times. The induction cooktop heats the cookware directly, ensuring that energy is used efficiently and reducing the risk of burns. This feature not only accelerates cooking but also enhances safety in the kitchen.

Another notable characteristic of the Electrolux 318201475 is its spacious design. The appliance includes multiple cooking zones, allowing users to prepare multiple dishes simultaneously. This is particularly beneficial for families or those who love to entertain guests. The cooktop is designed with user-friendly controls, providing intuitive operation and ensuring that users can easily adjust settings to achieve their desired cooking results.

Furthermore, the Electrolux 318201475 is equipped with a range of safety features. These include automatic shut-off capabilities and residual heat indicators, which help to prevent accidents and ensure peace of mind while cooking. The appliance’s sleek and modern appearance adds an aesthetic appeal to any kitchen, effortlessly blending with various interior designs.

Maintenance is also simplified with the Electrolux 318201475, as its smooth surface is easy to clean. The absence of traditional burners means that spills and splatters can be wiped away quickly, allowing for a hassle-free cooking experience.

In summary, the Electrolux 318201475 is a high-quality kitchen appliance that integrates advanced technology and user-centric features. With its efficient induction heating, spacious cooking zones, safety mechanisms, and easy maintenance, it stands out as an essential tool for anyone looking to elevate their cooking game. Whether preparing a simple meal or an elaborate feast, this appliance promises reliability, efficiency, and style in the kitchen. Investing in the Electrolux 318201475 means embracing the future of cooking.
Top Page Image Contents