SettingSurfaceControls 15

OPERATING THE TRIPLE SURFACE RADIANT ELEMENT

Boththe30”and36”cooktopsareequippedwith“Triple”surfaceradiantelements located as shown in Figs. 1 & 2. A touch key pad on the element controls is used to select one of the 3 positions of the element. Symbols and indicator lights on the control panel are used to indicate which coil of the triple radiant element will heat. The symbol indicates that only the inner element (See Fig. 3) will heat. Thesymbol indicates that both inner and middle elements (See Fig. 4) will heat together. Thesymbol indicates that all 3 portions of the element (See Fig. 5) will heat. You may switch from either of these settings at any time during cooking.

To Operate the Triple Surface Element:

Fig. 1

4.Select the INNER (Fig. 3), MIDDLE (Fig. 4) or ALL 3element (Fig. 5) to heat by touching the

k

p

ts .

Lo

b

on

ee ce kw

 

pad once to turn the element OFF and

 

On/Off

if no other surface element is used touch the

key pad to turn off the cooktop.

 

POWER

Note: The HE message will appear in the display after turning the control knob to OFF if the cooktop is still hot and remain on until the heating surface area has cooled sufficiently.