SettingSurfaceControls 17

LOCKING THE CONTROLS

The Cooktop Controls may be locked in order to prevent the cooktop from accidentally being turned ON. This feature can be activated at any time.

To Turn ON the Controls Lock Feature:

Touch and holf the key pad. After 5 seconds a beep will sound. The Lock Indicator Light

above the

key pad will turn ON indicating the cooktop is locked. This will keep any

Cooking Element or Cooktop functions from being accidentally turned ON.

Note: If the cooktop is in used when the Control Lock Feature is turn on, the cooktop will automatically turn OFF and enter in Control Lock Feature Mode.

To Turn OFF the Controls Lock Feature:

Touch and hold the key pad. After 5 seconds a beep will sound. The Lock Indicator Light

above the

key pad will turn OFF indicating the cooktop is unlocked. The Cooking

Elements or any of the other Cooktop functions may now be used.

SABBATH FEATURE MODE

When the Sabbath feature is ON, all electronic surface element control displays show “Sb” (Fig. 1). The surface elements can be used even if the Sabbath Feature is on.

To activate the Sabbath Feature Mode:

Touch and hold for few seconds the

 

pad of the left rear element (for 30”model) or

 

of

 

 

the left front element (for 36” model) and the

of the right front element at the same time.

After few seconds, “Sb” will appear in all element control displays.

To turn ON a Surface Element when the Sabbath Feature is active:

If you turn on a surface element when the oven Sabbath feature is on, the electronic surface Fig. 1 element control will record that request and execute it with a 15-30 seconds delay. So the

element will start heating 15-30 seconds after the surface element control was turned on. The surface element display will not show the setting because “Sb” is on in the displays. When necessary, it is possible to adjust the power of the surface element but you have to remember that the surface element control will adjust the temperature with the same delay.

To turn OFF the Surface Element when the Oven Sabbath Mode is active:

To shut off the surface element while the Sabbath feature is ON, proceed as usual but take note that the element will immediately turn off without any delay.

To deactivate the Sabbath Feature Mode:

Touch and hold for few seconds the

 

pad of the left rear element (for 30”model) or

 

of

 

 

the left front element (for 36” model) and the

of the right front element at the same time.

“Sb” will disappear from element control displays.