Installing and connecting
35
0Refit the plinth and stand the
appliance upright.
0Put the top eccentric bush on
the left.
0Put the cover cap and bearing
pin with the spiral spring on the
top of the door.
0Insert and close the door with
the bearing pin carefully in the
upper eccentric bush.
0Fit the washer down between
the door and bearing and screw
in the bearing bolt into the
lower door bearing.
0Remove the 3 hole covering pins.
0Loosen the 3 screws on the door
handle and move the door
handle towards the right.
0Insert the hole covering pins on
the left.