27
TO REPLACE THE OUTER DOOR GLASS
1. Holding the oven glass with both hands, gently
place the locators into the holes of the brackets
at the bottom of the oven door.
2. Holding the door glass with your left hand, use
your right hand to open the oven door.
Bring the door gently towards the glass panel
ensuring the screw location holes line up.
3. Place the trim in the correct position on the top of
the grill door.
4. Hold the glass in place with one hand and insert
the cross head screws with washers into the
location holes with the other hand. Give th e
screws oneturn to ensure the glass is secure.
5. Tighten the screws positively with a Pozidrive
screwdriver before closing the oven door.
DO NOT attempt to use the oven without the
glass being in place.
TO CLEAN THE INNER GLASS DOOR
The inner glass door is not removable. Clean using
hot soapy water or Hob Brite and a soft cloth. DO
NOT use abrasives as they may damage the glass or
seal.
CLEANING INSIDE THE OVENS
The oven roofs, sides, main oven back panel and grill
deflector are coated with a Stayclean finish.
The Stayclean areas should not be cleaned
manually. SeeCare of Stayclean Surfaces on page
28.
The base of the ovens and the grill / top oven
compartment back panel can be cleaned using
normal oven cleaners or aerosol oven cleaners with
care. Ensure that the manufacturers instructions are
followed and that all parts are well rinsed afterwards.
Do not use any cleaning agents or scrapers on the
Stayclean finish.
Damage will occurif soap impregnated steel wool
pads, aerosol cleaners or any abrasive cleaners
are used.