Manuals / Electrolux / Kitchen Appliance / Dishwasher

Electrolux 50674 user manual Installation, Fitting under a counter kitchen worktop or sink

Models: 50674

1 40

Download 40 pages 26.02 Kb

Page 32

32Installation

Installation instructions

Installation

WARNING!

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter (kitchen worktop or sink)

By removing the machine's worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

1. Remove the machine's worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

2.Insert the machine after adjusting the levelling with the adjustable feet.

Image 32

Electrolux 50674 user manual Installation, Fitting under a counter kitchen worktop or sink, Proceed as follows

Contents

Favorit Dear Customer Contents Installation instructions Safety information Correct useInstallation General safetyChild safety Product description Indicator lights Control panelSetting mode Function buttonsFirst use Set the water softenerSetting manually Setting electronicallyTo fill Use of dishwasher saltExamples Use of rinse aid Only use branded rinse aid for dishwashersAdjusting the dosage of rinse aid Daily useLoading cutlery and dishes Lower basket Cutlery basket Upper basket Use of detergent Fill with detergentMulti-tab function Detergent tabletsActivation/deactivation of the Multi-Tab function Activation/deactivation of the rinse aid dispenserWashing programmes Select and start a washing programmeSetting and starting the programme with delay start Cancelling the delay start and / or a washing programmeCare and cleaning Cleaning the filtersUnloading the dishwasher Interrupt a washing programme in progressClean all filters thoroughly under run- ning water Cleaning the spray arms External cleaningInternal cleaning Frost precautionsWhat to do if Moving the machineProgramme does not start Technical data Technical dataHints for test institutes Example loading arrangementsLower basket with cutlery basket Cutlery basket Proceed as follows InstallationFitting under a counter kitchen worktop or sink Locknut must be correctly fitted to avoid water leaks LevellingWater supply connections Water outlet hose connection Electrical connection Sink trap spigot, the entire plastic memEnvironment concerns Packaging materialPage Page Page Subject to change without notice