What to do, if, Error messages | Electrolux 50700 instruction

Operating Instructions

What to do, if ...

Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call an engineer to resolve a of fault listed here, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

...Error messages

•If the programme indicator for the selected wash programme is flashing and fault code (1 or (2 is displayed on the multi-display, you can probably rectify the fault yourself.

After rectifying this fault, press the button for the wash programme that has been started. The wash programme continues. If the fault code is displayed again, contact customer service.

•For all other faults, please contact customer service, stating the fault code.

	Symptom	Possible Cause	Solution
	Fault code (1 is dis-	Tap is blocked or furred with	Clean tap.
	played on the multi-	lime-scale.
	display.	The filter (where present) in
	The programme indica-	The filter (where present) in	Clean the filter in the
	tor for the selected	the threaded hose fitting is	threaded hose fitting.
	tor for the selected	blocked.	threaded hose fitting.
	wash programme is	blocked.
	wash programme is
	flashing:
	there is no water run-	The water inlet hose is not	Check hose installation.
	ning into the dish-	correctly laid.	Check hose installation.
	ning into the dish-	correctly laid.
	washer.
	Fault code (2 is dis-	The sink outlet is blocked.	Clean the sink outlet.
	played on the multi-
	display.
	The programme indica-	The water drain hose is not	Check hose installation.
	tor for the selected	correctly laid.	Check hose installation.
	wash programme is	correctly laid.
	wash programme is
	flashing.
	Fault code (3 is dis-	The leak prevention system	Close the tap and contact
	played on the multi-	The leak prevention system	your local AEG Sevice Force
	played on the multi-	has been triggered.	your local AEG Sevice Force
	display.	has been triggered.	Centre.
	display.		Centre.

26

Image 26

Electrolux 50700 manual What to do, if, Error messages

Contents

Ökofavorit Please read these user instructions carefully Tips on using the applianceDear customer Pass them on to any subsequent owner of the appliance Contents Installation and Connection Instructions Child Safety Safety InstructionsInstallation, Connection and Placing into Operation General Safety Correct Use Disposing of the Packaging Material DisposalEconomical and Ecological Dishwashing Disposal of Old Appliances Appliance Features and Control Panel Prior to using for the first time Control panel Hardness range of the water in your area Adjust the Water SoftenerSalt Use dishwasher salt Filling with Salt for the Water SoftenerFill with dishwasher salt Open the door, remove the lower rack Age the appliance Filling with Rinse AidOugh rinsing, spot and streak free drying Fill with rinse aid Adjusting Rinse Aid Dosing Daily Use Loading Cutlery and Dishes Not be washed in the dishwasher Loading Cutlery Loading Pans, Frying Pans and Large Plates Load large and heavily soiled dishes in the lower rack Loading Cups, Glasses Coffee Services Lowering the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Type Raising the Upper Basket Filling with Detergent Fill with detergent Bio Wash Programmes and Concentrated Detergents Detergent Recommendations Selecting the Wash Programme Programme Table Soiling Wash Programme Changing/Interrupting/CancellingStart the Wash Programme Changing the wash programme Dishwasher is switched on again Setting or Changing the Delay Start TimerCancelling the wash programme Changing the delay start Emptying the Dishwasher Care and CleaningSwitching Off the Dishwasher Cleaning the Filter Error messages What to do, if Dishes are still dirty There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are wet and dull There are dried water drops on the glasses and dishes Technical DataLower rinse aid dosing Sample loading arrangements Upper basket Lower basket with cutlery basket Cannot be kinked or crushed Installing the DishwasherFree-Standing Appliances Unscrew the screws 1 from the elbows on the back side Permitted water pressure Connecting the DishwasherWater Connection Connect the inlet hose Water drain Leak Prevention System Appliance is automatically pumped out Electrical Connection Changing a fuse Connections Guarantee Conditions Page Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG