10Door Reversal
14Remove button plug from upper left side of door and place in upper right side of door. Place door on lower LH hinge bracket.
Remove Button Plug |
From Left Side And |
Install On Right Side |
15Install upper LH hinge bracket by installing four (4) screws.
If door does not close properly after reversing, the following actions may be taken:
a)Loosen lower hinge screws and align door. Retighten screws.
b)Loosen upper hinge screws and align door. Retighten screws.
c)Remove door gasket, turn 180°, and reinstall.
16Route door harness behind lower front panel. Reconnect door harness to bracket.
17Attach LH toe grille.
18 | Reapply power. |
