Operating instructions
11
NOTE: if the drying results are not satisfactory it is possible to activate
only the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can only be
possible with the 3 in 1 function active.
Activation/deactivation of the rinse aid dispenser(The dishwasher must be switched off)
When the rinse aid dispenser has been activated, the rinse aid
indicator light on the control panel is automatically activated.
1. Press the On/Off button. The indicator lights of the programme
selection buttons will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated this means that a washing programme is set.
The programme must be cancelled: press simultaneously
function buttons 2and 3for about 2 seconds, the indicator
light of the set programme button starts flashing. After about 2
seconds the indicator lights of all the programme selection buttons
will illuminate, this means that the set washing programme has
been cancelled and the machine is now in setting mode.
2. Press simultaneously function buttons 2and 3, until the indicator
lights of function buttons 1, 2, 3and 4start flashing.
3. Press function button 2, the indicator lights of function buttons 1,
3and 4turn off while the indicator light of function button 2goes
on flashing.
4. To activate the rinse aid dispenser, press function button 2 again,
the indicator light end of programme illuminates, indicating that
the rinse aid dispenser has been activated.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
To deactivate the rinse aid dispenser again, follow the above
instructions until the indicator light end of programme turns off.
152955 17/2en 13-10-2005 15:59 Pagina 11