If the ignition system doesn't work there may be a fault with the
electrical supply. First, check the socket by trying out another piece of
electrical equipment in it, if that works correctly renew the fuse in the
plug.
If the fuse keeps failing there is a fault in the cooker which must be
put right. Do not use a fuse with a rating higher than 3 amps. Do not
carry out other electrical work. Unplug the cooker and tell your installer.
Replacing an oven light bulbYou need a 25 watt small Edison screw bulb with a temperature rating
of T300.
lMake sure the oven is cool before you replace a bulb.
lUnplug the cooker.
lOpen the oven door and remove the oven shelves.
lPlace palm of hand at top of lens flat against oven side. Use fingers
to lever lens away from housing.
lUnscrew the bulb by turning it to the left.
lFit a new bulb and then replace the glass bulb cover.
lReplace the oven shelves.
lPlug the cooker back into the electric supply.
The oven light bulbs are not covered by the manufacturers guarantee.
StorageThe compartment below the oven is useful for storing baking trays, cake
tins and so on. Do not store anything in this compartment which may
catch fire. Do not store anything which is hot as it will damage the
plastic coating.
It is important not to overfill the drawer.
Do not place any items in the drawer which
will stand taller than the wire work.
L Y R I C 5 5 G
28