LOCATION OF APPLIANCE

This appliance must not be installed in a bed-sitting room of volume less than 20m³ or in a bathroom shower room or garage. It is essential that the appliance is positioned as stated below. The appliance must be a minimum of 20mm from the rear wall (note that this dimension is provided by the inlet elbow). Shelves, wall cabinets and cooker hoods must not be fitted closer than 500mm to the top of the grill canopy or within 100mm of the sides of the grill. Curtains must not be fitted immediately behind the appliance or within 200mm of the sides of the grill. If fitted next to or between two base units a minimum space of 1mm must be left between the units and the sides of the appliance. The hotplate must be set to a minimum of 7mm above the adjacent units (note that the levelling feet fitted to the appliance will achieve a nominal height to hotplate level of 907mm -5+13mm). Base units not meeting the above conditions must be a minimum of 100mm away from the hotplate. L.P.G. cookers MUST NOT be installed below ground level, i.e in a basement, or aboard any boat, yacht or other vessel.

INSTALLATION

1.PARTS REQUIRED

The loose hotplate parts are packed in the polystyrene fitment on the top of the hotplate. The grill pan, grill pan handle, fixing screws and splashplate fixing screws can be found in the furniture pack which is located in the bottom compartment. The grill pan requires assembly before use (see Fig.1).

NOTE: Taptite screws are used to secure the handle. These are thread forming screws and sufficient pressure must be applied to allow the screws to produce a thread in the plunged holes.

2.GRILL ASSEMBLY

The two splashplate screws marked A (see Fig. 1a) should be screwed into the back of the appliance about halfway in. Engage the keyhole slots in the splashback behind the two screws taking care not to trap the H.T. wire (see Fig. 1b).

Insert the four splashplate screws marked B (see Fig. 1b). Tighten 6 off splashplate screws (see Fig.1b).

Connect the grill supply union at the back of the appliance and pull the grill H.T. lead through the opening in the splashplate. Feed lead through the hole in the top right hand side of the splashplate and connect on to the grill electrode, (see Fig.1b)

Fig.1

Grill Pan Handle Assembly:

Assemble grill pan (see Fig.1) and secure four screws provided.

Connect grill H.T. lead to grill electrode

Fig.1a

Fig.1b

33

Page 32 Page 34
Page 33
Image 33
Electrolux 55GS1 installation instructions Location of Appliance, Parts Required, Grill Assembly
Page 32 Page 34

55GS1 specifications

The Electrolux 55GS1 is a modern refrigerator that combines cutting-edge technology with sleek design to offer users an optimal food storage solution. Designed for those who prioritize both style and performance, the 55GS1 stands out with its impressive range of features and functionalities.

One of the standout characteristics of the Electrolux 55GS1 is its Energy Efficiency. With an energy rating of A+++, this unit is designed to consume less energy, which not only helps in reducing utility bills but also contributes to a more sustainable lifestyle. This eco-friendly feature allows consumers to enjoy the benefits of a high-performing refrigerator while being mindful of their environmental impact.

Another key feature is the Adaptive Technology. The 55GS1 employs intelligent sensors that monitor internal conditions and adjust cooling levels accordingly. This ensures that food stays fresher for longer, maintaining optimal temperatures for various types of food. The precision cooling technology helps in preventing temperature fluctuations, enhancing food preservation capabilities.

The refrigerator also boasts a No Frost function, significantly reducing the need for manual defrosting. This feature makes maintenance easy, ensuring that frost buildup is minimized, and airflow is optimized throughout the fridge and freezer compartments. Users can enjoy hassle-free storage without worrying about ice accumulation interfering with their favorite foods.

Additionally, the spacious interior of the 55GS1 is designed for maximum storage efficiency. Adjustable shelves allow for customized organization, accommodating larger items with ease. There are designated compartments for fruits and vegetables, maintaining humidity levels to keep produce fresh and crisp longer. The multi-airflow system ensures uniform temperature and humidity throughout, preserving the quality of food stored in different zones.

The Electrolux 55GS1 also showcases a user-friendly digital display. This interface allows for easy adjustments to settings, including temperature controls, and provides real-time status updates about the appliance's performance.

Overall, the Electrolux 55GS1 exemplifies a perfect balance of modern design, advanced technology, and practical features, making it an ideal choice for anyone seeking a reliable and efficient refrigerator for their kitchen. Whether it’s for a large family or an individual, this model is adept at meeting varying storage needs while ensuring that food remains fresh and delicious.
Top Page Image Contents