Symptom

Possible cause

Solution

 

The remaining running

 

 

time is adjusted

 

The remaining PROG. TIME

automatically depending

Automatic process. There

on the type of items

display changes rapidly.

is no unit fault.

being washed, the

 

 

 

washing time and the

 

 

degree of dampness

 

The drying process takes

 

Check the program

SPECIAL CARE button

selection: SPECIAL CARE

unusually long. 4.5 hours

pressed and too much

button appropriate only

after the beginning of the

laundry filled-in

for laundry amounts up

drying process:

 

to 2.5kg

- END display flashes

 

 

 

- acoustic signal sounds

Too much laundry

Reduce the amount of

- discontinuation of the

filled-in

laundry filled-in

drying process

 

Pre-dry the laundry more

- error code C6 is displayed

Laundry too damp

thoroughly

 

 

 

 

 

If after these checks, the tumble dryer still does not work, contact your local AEG Service Force Centre.

Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechani- cal or electrical breakdown.

Replace the interior light

0A replacement bulb can be purchased through your local AEG Service Force Centre (Part No: 647072580).

1 Warning! Never use standard light bulbs in your Lavatherm.

0Isolate the appliance from the mains supply.

0Screw-off the bulb cover. (The bulb is located at the top behind the door; see Front view).

0Replace the defective bulb.

0Screw-on the bulb cover.

1 Warning! For safety reasons the bulb cover must be screwed-on. The dryer must not be operated, without the cover in place.

29

Page 29
Image 29
Electrolux 57700 operating instructions Replace the interior light