9
THE ELECTRONIC SURFACE ELEMENT CONTROL (ESEC)
The Electronic Surface Element Control (“ESEC”) feature includes 5
digital display windows. The ESEC feature provides a numeric digital
setting for the 5 radiant surface element positions on the cooktop. These
settings work the same way as normal knob setting indicators work
except the settings are displayed in digital windows (Figs. 1 thru 4).

The available ESEC Display Settings

The ESEC control provides various heat levels from Hi (Fig. 2) to Lo (Fig.
4) and OFF (Fig. 1). The settings between 9.5 and 3.0 decrease or
increase in increments of .5 (1/2). The settings between 3.0 and 1.2 are
Simmer settings which decrease or increase in increments of .2 (1/5) to
Lo (Figure 4; lowest Simmer setting) for more precise settings at lower
heat levels. Use the Recommended Surface Setting Chart to determine
the correct setting for the kind of food you are preparing.
Note: The size and type of cookware used will influence the setting
needed for best cooking results.
LO
OFF
HI