Operating the hob

Touch control sensor panels

To operate the touch control sensor panels, touch the desired panel with the tip of your pointed finger until the relevant displays illuminate or go out, or until the desired function is carried out.

3 Ensure that you are only touching one sensor panel when operating the appliance. If you finger is too flat on the panel, the sensor panel below may be actuated as well.

Switching on the appliance

The entire appliance is switched on using the ”On/Off” sensor panel I.

Touch the “On/Off” sensor panel for approx. two seconds.

The digital displays will show ¾.

3 After the “On/Off” sensor panel has been actuated to switch on your appliance, a cooking setting must be selected for a cooking zone within approx. 10 seconds, or a time must be set using the timer (egg timer function). If not, the appliance will switch itself off again for reasons related to safety.

9