Installation Instructions

Safety instructions

The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.)

Installation may only be carried out by a qualified electrician. The minimum distances to other appliances are to be observed.

Drawers may only be installed with a protective board directly under the appliance.

The cut surfaces of the work top are to be protected against moisture using a suitable sealant.

The sealant seals the appliance to the work top with no gap.

Do not use silicon sealant between the appliance and the work top. Avoid installing the appliance next to doors and under windows. Otherwise hot cookware may be knocked off the rings when doors and windows are opened.

1 WARNING!

Risk of injury from electrical current.

The electrical mains terminal is live.

Observe connection schematic.

Observe electrical safety rules.

Ensure anti-shock protection through correct installation by a quali- fied electrician.

The appliance must be connected to the electrical supply by a quali- fied electrician.

1IMPORTANT!

Risk of injury from electrical current.

Loose and inappropriate plug and socket connections can make the ter- minal overheat.

Have the clamping joints correctedly installed by a qualified electri- cian.

Use strain relief clamp on cable.

A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm

Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors.

29