Sharp XG-MB65X Adjusting the Projected Image “SCR - ADJ” menu, 1Setting the Resize Mode

Adjusting the Projected Image (“SCR - ADJ” menu)

Menu operation n Page 37

	Picture	SCR - ADJ	PRJ - ADJ			Help
1	Resize			Normal
2	Image Shift	0
3	AutoKeystoneKeystone	0
				Off
4	OSD Display			On
5	Background			Logo
6	Setup Guide			On
7	PRJ Mode			Front
8	Language			English
	SEL./ADJ.	ENTER			END

1Setting the Resize Mode

Note

•For details of the Resize mode, see pages 32 and 33.

•You can also press HRESIZE on the remote control to set the resize mode. (See page 32.)

3Keystone Correction

When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trap- ezoidal distortion is called Keystone Correction.

For Auto Keystone Correction

2Adjusting the Image Position

You can move the projected image vertically.

O button Q button

Note

•You cannot set this item when “Resize” is set to “Normal”.

Set “Auto Keystone” on the “SCR - ADJ” menu to “On”.

For Manual Keystone Correction

Set “Auto Keystone” on the “SCR - ADJ” menu to “Off”, select “Keystone”, and then adjust with the slide bar.

Manual Correction

Q or P button O or R button

See page 31 for details of Keystone Correction.

Note

•The Keystone Correction can be adjusted up to an angle of approximately ±13 degrees with the “Auto Keystone” and up to an angle of approximately ±13 degrees with the manual “Keystone” (when “Resize” is set to “Normal”).

Features Useful

41