Sharp XG-MB65X operation manual Troubleshooting with “Help” menu, Utilizing “Help” menu functions

Troubleshooting with “Help” menu

This function advises you to solve the problems during usage.

Adjustment buttons (P/R/O/Q)

Utilizing “Help” menu functions

MENU/HELP button

ENTER button

Example: When image flickering appears

Operation to solve image flickering when pro- jecting the computer RGB signal.

1

2

3

Press BMENU/HELP.

Press Oor Qto select “Help”, then press hENTER.

Press P or R to select “Vertical stripes or flickering image ap- pears” on Help menu, then press hENTER.

Picture	SCR - ADJ	PRJ - ADJ	Help
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settings
SEL.		ENTER	END

Help

Vertical stripes or flickering image appear

Initiate “Auto Sync” Adjustments.

If there is no change after performing "Auto Sync" adjustments, adjust the following items.

Adjust vertical noise

Adjust horizontal noise

Reset the 2 items above Return

Cur. sig. freq: H 43 kHz / V 60 Hz

SEL. ENTER END

4 Select “Initiate “Auto Sync” Ad- justments”, then press hENTER.

5 If the image is not improved, se- lect “Adjust horizontal noise.”, then press hENTER.

6 Press O or Q to adjust.

			Help
Phase	0
SEL./ADJ.	Rtn. Menu	END

Note

•You can adjust the items with check marks (✔).

•The items in the “Help” menu change, de- pending on the input signal or setting that you have selected.

•If the problem is not solved, refer to “Troubleshooting”. (see pages 59 and 60)

•When selecting “sRGB” in "Picture Mode”, the item “Color is faded or poor” is not displayed. This means you cannot change input signal types.

46