Sharp XG-MB65X operation manual Connecting Pin Assignments, Gnd

Connecting Pin Assignments

COMPUTER-RGB/COMPONENT INPUT1, 2 and COMPUTER-RGB/COMPONENT OUTPUT Terminals: 15-pin mini D-sub female connector

					COMPUTER-RGB Input/Output				Component Input/Output
					1.	Video input (red)			1.	PR (CR)
					2. Video input (green/sync on green)				2.	Y
11			15		3.	Video input (blue)			3.	PB (CB)
					4.	Not connected			4.	Not connected
					5.	Not connected			5.	Not connected
					6.	Earth (red)			6.	Earth (PR)
					7. Earth (green/sync on green)				7.	Earth (Y)
					8.	Earth (blue)			8.	Earth (PB)
					9.	Not connected			9.	Not connected
					10.	GND			10.	Not connected
	1		5
					11.	Not connected			11.	Not connected
6			10
					12.	Bi-directional data			12.	Not connected
					13. Horizontal sync signal: TTL level				13.	Not connected
					14. Vertical sync signal: TTL level				14.	Not connected
					15.	Data clock			15.	Not connected
RS-232C Terminal: 9-pin mini DIN female connector
		8		Pin No.		Signal	Name	I/O	Reference
9			7		1.				Not connected
					2.	RD	Receive Data	Input	Connected to internal circuit
					3.	SD	Send Data	Output	Connected to internal circuit
6			3		4.				Not connected
					5.	SG	Signal Ground		Connected to internal circuit
					6.				Not connected
5			4		7.	RS	Request to Send		Connected to CS in internal circuit
					8.	CS	Clear to Send		Connected to RS in internal circuit
2			1		9.				Not connected
RS-232C Terminal: 9-pin D-sub male connector of the DIN-D-sub RS-232C adaptor
				Pin No.		Signal	Name	I/O	Reference
1			5		1.	RD			Not connected
					2.		Receive Data	Input	Connected to internal circuit
					3.	SD	Send Data	Output	Connected to internal circuit
					4.	SG			Not connected
					5.		Signal Ground		Connected to internal circuit
					6.	RS			Not connected
					7.		Request to Send		Connected to CS in internal circuit
6			9		8.	CS	Clear to Send		Connected to RS in internal circuit
					9.				Not connected
RS-232C Cable recommended connection: 9-pinD-sub female connector
				Pin No.		Signal		Pin No.	Signal
5			1		1.	CD		1.	CD
					2.	RD		2.	RD
					3.	SD		3.	SD
					4.	ER		4.	ER
					5.	SG		5.	SG
					6.	DR		6.	DR
					7.	RS		7.	RS
9			6		8.	CS		8.	CS
					9.	CI		9.	CI

Note

•Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling device (e.g. computer).

Projector	Computer
Pin No.		Pin No.
4			4
5				5
6				6

Appendix

53