Sharp XG-MB65X operation manual Connecting to Video Equipment, When using an S-video cable INPUT3

Connecting to Video Equipment

The projector is equipped with input terminals that support component, S-video, and video signals. See the illustration below to connect with the audio-visual equipment.

The image quality is highest in the order of the component signal, the S-video signal and the video signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/ COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection.

When using a 3 RCA (Component) to 15-pin D-sub cable (INPUT1 or INPUT2)

To audio output terminal

To component output (Y, CB/PB, CR/PR) terminal	To INPUT1
DVD, etc.		To AUDIO
	terminal
		(INPUT1, 2)
		terminal

3 RCA (Component) to 15-pin D-sub cable (optional: AN-C3CP2)

ø3.5 mm minijack to RCA audio cable (commercially available)

When using an S-video cable (INPUT3)

To audio output terminal

To S-video output terminal

DVD, etc.

To AUDIO

To INPUT3 (INPUT3, 4)

terminalterminal

L

R

S-video cable

RCA audio cable (com-(commercially available) mercially available)

24