Adjusting the Projector Function (“PRJ - ADJ” menu)
Menu operation n Page 37
Picture | SCR - ADJ PRJ - ADJ | Help |
Auto Search | On |
|
Auto Sync | On |
|
Auto Power Off | On |
|
System Sound | On |
|
Speaker | On |
|
9600 bps |
| |
Fan Mode | Normal |
|
System Lock
|
| Lamp Timer(Life) | 0 h | 100% |
|
|
|
| |||
|
|
|
|
|
|
| SEL./ADJ. | ENTER | END | ||
1Auto Search Function
This function automatically searches for and switches to the input mode in which signals are being received, when the projector is turned on, or when the INPUT button is pressed.
Note
When “Auto Search” is set to “On”
•If two or more input signals are found, the pro- jector selects the input source in the order of INPUT 1 n INPUT 2 n INPUT 3 n INPUT 4 when you press INPUT (P/R) on the projec- tor.
•While “Auto Search” is set to “On”, press CINPUT 1,CINPUT 2, DINPUT 3 or EINPUT 4 on the remote control to select an input mode other than the input mode se- lected by the projector.
3Auto Power Off
| Function | |
|
| |
Selectable | Description | |
| items | |
|
| |
|
|
|
On |
| When no input signal is detected for |
|
| more than 15 minutes, the projector will |
|
| automatically enter standby mode. |
|
|
|
Off |
| The Auto Power Off function will be |
|
| disabled. |
|
|
|
Note
•When the Auto Power Off function is set to “On”, 5 minutes before the projector enters standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.
2Auto Sync (Auto Sync Adjustment)
Selectable items | Description |
|
|
On | Auto Sync adjustment will |
| occur when the projector is |
| turned on or when the input |
| signals are switched, when |
| connected to a computer. |
Off | Auto Sync adjustment is not |
| automatically performed. |
|
|
Note
•Auto Sync adjustment is also performed by pressing F AUTO SYNC on the remote con- trol.
•The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.
•When the optimum image cannot be achieved with Auto Sync adjustment, use manual ad- justments. (See page 46.)
4Setting the Confirmation Sound (System Sound)
Selectable | Description | |
items | ||
| ||
|
| |
On | A confirmation sound is made when | |
| the projector turns on/off. | |
|
| |
Off | No confirmation sound is made. | |
|
|
5Speaker Setting
Selectable | Description | |
items | ||
| ||
On | The audio signal is output from the | |
| internal speaker. | |
|
| |
Off | The audio signal is not output from the | |
| internal speaker. | |
|
|
Features | Useful |
43
