Electrolux 66301K-MN manual What to do if …, Problem, Possible cause, Remedy

What to do if …

Problem	Possible cause	Remedy
The cooking zones will not	More than 10 seconds have	Switch the appliance on
switch on or are not func-	passed since the appliance	again.
tioning	was switched on
	The child safety device is	Deactivate the child safety
	switched on l	device (See the section
		“Child safety device”)
	Several sensor fields were	Only touch one sensor field
	touched at the same time
	Safety cut-out has been	Remove any objects (pan,
	triggered	cloths, etc.) that are lying
		on the control panel.
		Switch the appliance on
		again
	STOP+GO is activated u	Switching off STOP+GO
Acoustic signal sounds	The control panel is wholly	Remove objects.
when appliance is switched	or partly covered by ob-
off	jects.
The residual heat indicator	The cooking zone was only	If the cooking zone is sup-
is not displaying anything	on for a short time and is	posed to be hot, call the
	therefore not hot	Customer Service Depart-
		ment.
The automatic warm up	There is still residual heat	Let the cooking zone cool
function is not switching	on the cooking zone h	down
itself on	The highest heat setting is	The highest heat setting
	set Ç	has the same power as the
		automatic warm up func-
		tion
	The heat setting was set	1. Switching off the cook-
	using the sensor field	ing zone
		2 . Set the cooking zone us-
		ing the sensor field
Acoustic signal sounds and	The On/Off sensor field has	Do not place any objects
appliance switches itself on	been covered up, e.g. by a	on the control panel
and then off again; after 5	cloth
seconds another acoustic
signal sounds
_ is lit	Overheating protection for	Switch off the cooking
	the cooking zone has been	zone. Switch the cooking
	triggered	zone on again

20