What to do if …
Problem | Possible cause | Remedy |
The cooking zones will not | More than 10 seconds have | Switch the appliance on |
switch on or are not func- | passed since the appliance | again. |
tioning | was switched on |
|
| The lock is switched on l | Switch off the lock (See |
|
| the section “Locking/un- |
|
| locking the control panel”) |
| The child safety device is | Deactivate the child safety |
| switched on l | device (See the section |
|
| “Child safety device”) |
| Several sensor fields were | Only touch one sensor field |
| touched at the same time |
|
| The sensor fields are partly | Remove the cloth or the |
| covered by a damp cloth or | liquid. |
| with liquid | Switch the appliance on |
|
| again. |
| Safety | Switch the appliance on |
| triggered | again |
| STOP+GO is activated | Switching off STOP+GO |
|
|
|
The residual heat indicator | The cooking zone was only | If the cooking zone is sup- |
is not displaying anything | on for a short time and is | posed to be hot, call your |
| therefore not hot | local Service Force Centre. |
The automatic warm up | There is still residual heat | Let the cooking zone cool |
function is not switching | on the cooking zone h | down |
itself on | The highest heat setting is | The highest heat setting |
| ||
| set Ç | has the same power as the |
|
| automatic warm up func- |
|
| tion |
Repeated acoustic signal | One or more sensor fields | Uncover sensor field |
(6x), appliance switches off | have been covered for |
|
| longer than 10 seconds |
|
Display is switching be- | Power management is re- | See the section “Switching |
tween two heat settings | ducing the power of this | the power function on and |
| cooking zone | off” |
|
|
|
22