Operating Instructions
What to do when…
3The whistling noise when spinning may be different to your prevous washing machine which is due to the
modern drive system.
Trouble Shooting
If you call out an engineer and the fault is listed here, a charge is levied even if the appliance is in guarantee.
•If the error code (1 or (2 is displayed in the
Display (1 "No water flows in ...".
Display (2 "Washing has not been spun sufficiently, ...".
After eliminating the error, press the START/PAUSE button. If the error code is displayed again, please contact your local AEG Service Force Centre
•For all other errors displayed in the
Malfunction
Washing machine does not work.
No water flows in. Error code (1 appears.
Possible Cause |
| Remedy |
|
|
|
|
|
|
Mains plug is not plugged in. |
| Insert mains plug. |
|
|
|
|
|
|
House fuse is defective. |
| Replace fuse. |
|
|
|
|
|
|
Door is not closed properly. |
| Close door; lock must engage |
| audibly. | |
|
| |
|
|
|
|
|
|
START/PAUSE button not |
| Keep START/PAUSE button |
| pressed until the program | |
pressed for long enough. |
| |
| starts. | |
|
| |
|
|
|
|
|
|
Tap is closed. |
| Open tap. |
|
|
|
Filter in the threaded fitting |
| Unscrew the hose from the |
on the water inlet hose is |
| tap, remove the filter and |
blocked. |
| clean under running water. |
|
|
|
28
