What to do if, Trouble Shooting | Electrolux 72630 manual

Operating Instructions

What to do if...

Trouble Shooting

If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre.

Important: If you call out an engineer to a fault listed below, or to re- pair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

• If the fault code E10, E20 or E40 is shown in

the multi-display, you may be able to remedy the fault yourself (see the Faults table below).

After clearing the fault, press the START/ PAUSE button. If the fault code is displayed again, contact your local AEG Service Force Centre.

•For all other faults displayed in the multi-display, please contact your local AEG Service Force Centre, stating the fault code.

	Problem	Possible Cause	Remedy
		The mains plug is not	Plug in the mains plug.
		plugged in.	Plug in the mains plug.
		plugged in.
		The house fuse has blown.	Replace the fuse.
	The washing machine	The door is not correctly	Close the door; The lock must
	does not work.	The door is not correctly	Close the door; The lock must
	does not work.	closed.	engage audibly.
		closed.	engage audibly.
		START/PAUSE button not	Keep the START/PAUSE but-
		START/PAUSE button not	ton pressed until the pro-
		pressed long enough.	ton pressed until the pro-
		pressed long enough.	gramme begins.
			gramme begins.

			Cancel the child safety fea-
	Door cannot be closed.	The child safety feature is set	ture (see Section "Child
			Safety Feature“).
	The fault code E40	The door is not correctly	Close the door correctly.
	appears. The display	The door is not correctly	Close the door correctly.
	appears. The display	closed.	Start the programme again.
	MAIN WASH flashes.	closed.	Start the programme again.
	MAIN WASH flashes.

30

Image 30

Electrolux 72630 manual What to do if, Trouble Shooting

Contents

ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Page Safety Prior to initial start-upIntended Use Child Safety General Safety Environmental tips When disposing of the washing machineDisposal Packaging Detergent dispenser drawer Description of the ApplianceFront view Stain removers Control panel Programme selector Wool P hand wash Shortened main washing cycle for lightly soiled washing Stain removers only become effective at higher temperaturesProgramme option buttons Tions cannot be selected any buttons pressed do not What does Update mean? Consumption data and wash times Before the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Setting the Washing Programme Changing the spin speed/Selecting Rinse Hold Setting the delay timer / soaking duration Delay timer Soaking duration See Programme Tables for maximum loads Opening and closing the doorLoading the washing Lights up green Flashes red Yes Conditioners If using liquid detergent / tabletsAdd detergent / conditioner Adding detergent / conditioner Washing Programme Progress If the delay timer has been setStarting the washing programme Programme progress display Selecting the programme options Change the washing programmeChanging or stopping the wash programme Changing the Spin Speed Washing cycle is complete/Removing the washing Electricity mains Programme tables Washing Separate conditioning/starching Separate rinseSeparate spin Maintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main door Cleaning the drain pump Before cleaning the drain pumpGency emptying Trouble Shooting What to do if Not been removed Limescale or is faulty It repaired if necessaryWater tap is closed Open the water tap No water flows Machine is not level Fault code E20 Clean the detergent disContact your local Service Cial accessory Lights up green Tap is blocked Clean the filter Rinsing water isCloudy Content Detergent if necessary Door High water level or a high If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washing Carrying out an emergency emptying Have a flat container on hand to catch the water Cancelling the additional rinse function When the water is completely drainedSetting the additional rinse function Additional Rinse RINSE+ Washing programme can be Child Safety FeatureCancelling the child safety feature Started Installation and connection instructions Installation Safety Precautions Installation of the appliance Transporting the applianceRemove transport packaging Cover the hole with the cap G Caps D 2 each and G 1 each Installation-Site preparation Installation on a Suspended Floor Check that the appliance is level using a spirit level Levelling the Appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection Disposed of safely Water connection Water pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Great Britain Page Page Page Index Multi-display , 19, 22, 30 PNC Service & Spare Parts0870 5 929 Help us to help you Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG