Ice & Water

Automatic Ice

Filter

Maker

continued

 

 

TO CHANGE FRONT FILTER: (some models)

Refer to Figure 4 as needed. It is not neces- sary to turn the water supply off to change filter.

1.Set ice maker lever (wire signal arm) to the OFF (up) position.

2.Push the Filter Release Button, located to the right of the filtre cartridge, to release the filter from the housing. NOTE: A small amount of water may be releasedduring this operation. To minimize the possibility of the filter falling out of the housing during removal, it would be best to hold the filter as it moves out to- ward you.

3.Pull the old filter cartridge straight out of the housing.

4.Discard the old filter.

5.Replace new cartridge, installing the same way as the old one came out.

6.When the cartridge is almost in, you will feel it stop against the clip assembly in the back of the housing. The clip assem- bly holds the filter cartridge firmly in place. At this point, you will need to push firmly until the cartridge snaps fully in place. When completely in place, the front of the filter cartridge will be flush with the front of the housing.

7.Set the ice maker wire signal arm to the ON (down) position.

8.Check for leaks. Fill a glass with water. There will be noticable spurts and sput- ters as the system pushes the air out through the system and out the dispenser nozzle. This is normal.

9.After you have run one glass of water, con- tinue to flush the system for approximately 3 minutes.

Resetting The Filter Status Light

(some models)

After replacing the filter cartridge, it will be necessary to press the Filter Reset touchpad located on the ice and water dispenser. This will reset the Change Filter Indicator. Push the reset button until the green light flashes (3-15 seconds).

Filter

Cartridge

Figure 4

Push In

Push Button

and Click

To Install

To Release

OPERATION OF AUTOMATIC ICE MAKER (Some Models)

If your refrigerator has an automatic ice maker, it will provide a continuous supply of ice. If not factory installed, the ice maker can be purchased as an accessory kit from your dealer.

220-240V, 50/60 Hz models use ice maker kit number IM220. This ice maker kit must be installed by a qualified techni- cian only.

CAUTION: Ensure that the ice maker water supply tube is connected to a safe (potable) water pipe only.

CAUTION: Water supply must have minimum pressure of 1.4 bars (20 psi) and maximum water pressure of 6.9 bars (100 psi).

Place the ice container under the ice maker. Lower the wire signal arm to the DOWN position. When the freezer is cold, ice making will begin. To stop ice maker, lift the wire signal arm until it clicks in and locks in the UP position. It is not necessary to stop the ice maker when the ice server is full. The ice maker will automatically shut itself off when the ice level reaches a certain point in the server.

Due to new plumbing connections, the first production of ice from your ice maker may be discolored or have an odd taste. Please discard.

If the dispensing paddle is pushed for more than 4 minutes, the dispenser motor may overload and stop. The overload protector will reset automatically after 3 or 4 minutes.

9

Page 8 Page 10
Page 9
Image 9
Electrolux 7388KG, 7380KG Ice & Water Automatic Ice Filter Maker, To Change Front Filter some models
Page 8 Page 10

7380KG, 7388KG specifications

Electrolux has long been a leader in innovative home appliances, and its latest offerings, the Electrolux 7388KG and 7380KG, showcase the brand's commitment to quality and performance. These washing machines are designed to enhance laundry efficiency while ensuring superior cleaning results.

The Electrolux 7388KG is equipped with a robust 8 kg washing capacity, making it ideal for medium to large households. One of its standout features is the EcoFlow technology, which optimizes water and energy consumption, providing an environmentally friendly option without compromising performance. The machine boasts a variety of wash programs tailored for different fabric types, ensuring that even delicate materials receive the appropriate care.

The 7380KG model also maintains a competitive 8 kg capacity but introduces innovative features like the SensiCare system, which automatically adjusts the wash cycle based on the load size. This technology minimizes water and energy usage while still delivering a thorough clean, promoting sustainability. Both models are designed with inverter motor technology, reducing noise levels and vibrations, making laundry time a quieter experience.

Another remarkable feature is the UltraMix technology used in both models. This system pre-mixes detergent with water before it enters the drum, ensuring that the detergent is evenly distributed and activated, leading to improved cleaning results even at lower temperatures. This not only enhances washing efficiency but also extends the life of your clothes, as gentle yet effective cleaning reduces fabric wear.

Incorporating a user-friendly interface, both models come with a digital display that allows for easy program selection and cycle monitoring. The delayed start feature is particularly convenient, enabling users to schedule washes for later, optimizing energy use during non-peak hours.

Furthermore, the Electrolux 7388KG and 7380KG are built with a focus on durability and design. Their sleek aesthetics complement modern laundry spaces, while robust construction ensures long-lasting performance. Maintenance is made simple with self-cleaning filters and easy-access components, encouraging regular upkeep.

In summary, the Electrolux 7388KG and 7380KG washing machines exemplify advanced technology and thoughtful design. With features geared towards efficiency, sustainability, and user convenience, these models prove to be excellent choices for households seeking reliable and effective laundry solutions. As Electrolux continues to evolve its product lineup, these machines embody the brand's dedication to delivering high-quality and innovative home appliances.
Top Page Image Contents