Electrolux 7388KG, 7380KG Care Cleaning, Inside, Care and Cleaning of ICE Dispenser, Outside

Care and	Care and	Care &
Cleaning	Cleaning	Cleaning
	continued	continued

It is important to keep your refrigerator clean to prevent bacteria and odor from forming.

Remove all food and disconnect the power source before cleaning the interior compart- ment.

Always disconnect the service cord from wall before cleaning the refrigerator. Turning the interior controls to “0” will not disconnect the power supply.

Failure to disconnect the power supply may result in electrical shock and personal injury.

INSIDE

Wash the inside of the refrigerator and freezer with a mild household cleaner or a solution of 2 tablespoons of baking soda in 1 liter of warm water. Rinse and dry.

Avoid getting water inside electrical parts such as the temperature controls or the light fixtures.

Wash removable parts, storage bins and door gaskets in a mild household detergent and warm water. Rinse and dry.

CARE AND CLEANING OF ICE

DISPENSER:

Clean the dispenser and storage bin periodically:

1.Stop ice production (raise signal arm).

2.Remove storage bin. Empty and clean with mild detergent and warm water. DO NOT submerge bin in water or use abrasive cleaners.

3.Remove ice chips, clean the shelf and ice chute.

4.Replace storage bin.

5.Begin ice production again (lower signal arm).

Do not use metallic scouring pads, brushes, abrasive cleaners, or alkaline solutions to clean the refrigerator. Use a sponge or soft cloth.

Do not wash removable parts in a dish- washer.

Damp objects stick to frozen surfaces. Do not touch frozen surfaces with wet hands.

Do not use flammable or toxic cleaning materials.

(continued)

OUTSIDE

Wash cabinet with warm water and a mild liquid detergent. Rinse well and wipe with a clean soft cloth.

To prevent damage to your floor when moving the refrigerator, place a mat or rug under the front levelers or rollers.

CONDENSER CLEANING

Since your refrigerator is equipped with a Never Clean condenser, there’s no need to clean the condenser under normal operat- ing conditions. If the refrigerator is oper- ated under particularly dusty or greasy conditions, or if there is significant pet traffic in your home, it may be necessary to periodically clean the condenser for maximum efficiency.

If cleaning of the condenser is necessary, remove the toe grille and use an extended vacuum attachment and condenser cleaning brush (available from your local dealer) to remove dust build-up from the condenser coils.

Plan to remove the ice storage bin from the freezer if:

1.A power failure of 1 hour or more causes ice remaining in machine to melt and then freeze together causing the ice making mechanism to jam when the power resumes.

2.The ice maker is not used frequently.

CAUTION - DO NOT put fingers up ice chute. Surfaces may be sharp.

DO NOT rotate the auger when replacing the ice bin. To realign auger, rotate it in 90° turns until ice bin fits into place with driver mechanism.

(continued)

11