Maytag 8113P636-60, MER6765BAB, MER6765BAW, MER6765BAQ, MER6765BAS manual Troubleshooting, Problem

Models: 8113P636-60, MER6765BAB, MER6765BAW, MER6765BAQ, MER6765BAS

1 76
Download 76 pages 5.09 Kb
Page 23
Image 23
• Excessive spillovers, especially sugary and/or acidic foods, were not removed prior

Manual background Troubleshooting

PROBLEM

SOLUTION

Oven did not clean properly.

• Longer cleaning time may be needed.

 

• Excessive spillovers, especially sugary and/or acidic foods, were not removed prior

 

to the self-clean cycle.

 

 

Oven door will not unlock after

• Oven interior is still hot. Allow about one hour for the oven to cool after the

self-clean cycle.

completion of a self-clean cycle. The door can be opened when “Lock” is

 

not displayed.

 

• The control and door may be locked. See page 8.

 

 

Moisture collects on oven

• This is normal when cooking foods high in moisture.

window or steam comes from

• Excessive moisture was used when cleaning the window.

oven vent.

 

 

 

There is a strong odor or light

• This is normal for a new range and will disappear after a few uses. Initiating a clean

smoke when oven is turned on.

cycle will “burn off” the odors more quickly.

 

• Turning on a ventilation fan will help remove the smoke and/or odor.

 

• Excessive food soils on the oven bottom. Use a self-clean cycle.

 

 

Fault Codes

• “Bake” or “Lock” may flash rapidly in the display to alert you if there is an error

 

or a problem. If “Bake” or “Lock” appear in the display, press CANCEL pad.

 

If “Bake” or “Lock” continue to flash, disconnect power to the appliance.

 

Wait a few minutes, and then reconnect power. If the flashing still continues,

 

disconnect power to the appliance and call an authorized servicer.

 

• If the oven is heavily soiled, excessive flareups may result in a fault code during

 

cleaning. Press the CANCEL pad and allow the oven to cool completely, wipe out

 

excess soil, then reset the clean cycle. If the fault code reappears, contact an

 

authorized servicer.

 

 

Noises may be heard.

• The oven makes several low-level noises. You may hear the oven relays as they go on

 

and off. This is normal.

 

• As the oven heats and cools, you may hear sounds of metal parts expanding and

 

contracting. This is normal and will not damage your appliance.

 

 

There are no beeps and

• Oven may be in Sabbath Mode. See page 13.

no display.

 

 

 

22

Page 23
Image 23
Maytag 8113P636-60, MER6765BAB, MER6765BAW, MER6765BAQ, MER6765BAS manual Troubleshooting, Problem, Solution