TROUBLESHOOTING
Problem | Possible cause | Solution | |
|
|
| |
No ‘red’ power on LED | Machine is not switched on | Switch on machine at rear next to plug | |
inlet and at the wall socket | |||
|
| ||
|
|
| |
Ready light does not come on after a | Machine is in a hot or humid area | Move the machine to a cooler and | |
long period | dry area | ||
| |||
|
|
| |
| Item may be too thick to laminate | Pass through the machine again | |
|
|
| |
Pouch does not completely seal the item | Temperature setting may be incorrect | Check pouch thickness is correctly | |
| selected and pass through again | ||
|
| ||
|
|
| |
Pouch has waves or bubbles | Temperature setting may be incorrect | Check pouch thickness is correctly | |
selected and pass through again | |||
|
| ||
|
|
| |
Pouch is lost in the machine | Pouch is jammed |
| |
|
|
| |
| Pouch was used ‘open end’ first | Select reverse button and pull out the | |
|
| ||
Jamming | Pouch was not centered on entry | ||
item by hand | |||
| |||
Pouch was not straight upon entry | |||
|
| ||
|
|
| |
| Empty pouch was used |
| |
|
|
| |
|
| Pass cleaning sheet (Fellowes | |
Pouch is damaged after lamination | Damaged rollers or adhesive on rollers | #5320603) through the machine to | |
|
| test and clean rollers | |
|
|
| |
STORAGE & CLEANING |
|
| |
|
|
|
Switch off the machine at the wall. Allow the machine to cool.
The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine. Cleaning sheets can be used with the machine. When the machine is warm – run the sheets through the machine to clean any residue off the rollers.
For optimum performance, it is recommended that cleaning sheets (Fellowes #5320603 are used with the machine regularly.
403843_2_NA_Neptune_EFS_v6.2.indd 7
7
12/08/2009 16:21:21